Resource Library

The Genie Traveling Fall Arrest Anchor System (TFAAS) consists of a sliding and horizontal track design that allows the operator to tie off and move freely outside of an aerial work platform using a single 6-ft shock-absorbing lanyard. The guideline reviews the inspection, installation and the use and precautions.

The Hot Work Permit is required for any temporary operation involving open flames or producing heat and/or sparks.
This includes, but is not limited to: brazing, cutting, grinding, soldering, torch-applied roofing and welding.

The Occupational Safety and Health Administration and the Fire Code of New York State(FCNYS) require facilities to develop procedures to protect both human health and the facility itself from the hazards posed by hot work in the workplace. This program is intended to provide the Cornell University community with the guidance necessary to comply with these regulations.

Form for Window Washing Plan.

When systems or equipment require the shutdown of multiple energy isolating devices or have multiple hazardous energy sources, a written Multiple Energy Isolation Checklist shall be established.

Abandoned lock removal form.

Troubleshooting work permit form.

Periodic Inspection Form.

Entry Permit for Confined Space.