Resource Library

This Guidance Document is a summary of several of the significant requirements for fuel dispensing systems subject to 40CFR Part 63 Subpart CCCCCC: Gasoline Dispensing Facilities (Area Sources).

Toolbox Talk for general riding mowers safety training and preparing for safe operation and preventing accidents.

The Genie Traveling Fall Arrest Anchor System (TFAAS) consists of a sliding and horizontal track design that allows the operator to tie off and move freely outside of an aerial work platform using a single 6-ft shock-absorbing lanyard. The guideline reviews the inspection, installation and the use and precautions.

The Hot Work Permit is required for any temporary operation involving open flames or producing heat and/or sparks.
This includes, but is not limited to: brazing, cutting, grinding, soldering, torch-applied roofing and welding.

Toolbox Talk training for Golf Cart Safety.

Reviews Grip Pinch Risk Factor with an introduction, warm-up, microbreak/recovery, injury prevention suggestions, and pro tips.

Reviews general and specific requirements.

The Occupational Safety and Health Administration and the Fire Code of New York State(FCNYS) require facilities to develop procedures to protect both human health and the facility itself from the hazards posed by hot work in the workplace. This program is intended to provide the Cornell University community with the guidance necessary to comply with these regulations.