Skip to main content

Resource Library

General Riding Mowers Safety Toolbox Talk Protected Document

Toolbox Talk for general riding mowers safety training and preparing for safe operation and preventing accidents.

Categories:

Toolbox Talk

Genie Traveling Fall Arrest Anchor System Protected Document

The Genie Traveling Fall Arrest Anchor System (TFAAS) consists of a sliding and horizontal track design that allows the operator to tie off and move freely outside of an aerial work platform using a single 6-ft shock-absorbing lanyard. The guideline reviews the inspection, installation and the use and precautions.

Categories:

Guidelines

FM Global Hot Work Permit

The Hot Work Permit is required for any temporary operation involving open flames or producing heat and/or sparks.
This includes, but is not limited to: brazing, cutting, grinding, soldering, torch-applied roofing and welding.

Golf Cart Safety Toolbox Talk Protected Document

Toolbox Talk training for Golf Cart Safety.

Categories:

Toolbox Talk

Grip Pinch Risk Factor Toolbox Safety Talk Protected Document

Reviews Grip Pinch Risk Factor with an introduction, warm-up, microbreak/recovery, injury prevention suggestions, and pro tips.

Categories:

Toolbox Talk

Hand and Power Tools Toolbox Talk

Reviews general and specific requirements.

Categories:

Toolbox Talk

Hot Work Program Protected Document

The Occupational Safety and Health Administration and the Fire Code of New York State(FCNYS) require facilities to develop procedures to protect both human health and the facility itself from the hazards posed by hot work in the workplace. This program is intended to provide the Cornell University community with the guidance necessary to comply with these regulations.

Hot Work Toolbox Talk

The Hot Work Toolbox Talk reviews the program scope, and general hot work safety rules.