Resource Library
General Riding Mowers Safety Toolbox Talk Protected Document
Toolbox Talk for general riding mowers safety training and preparing for safe operation and preventing accidents.
Genie Traveling Fall Arrest Anchor System Protected Document
The Genie Traveling Fall Arrest Anchor System (TFAAS) consists of a sliding and horizontal track design that allows the operator to tie off and move freely outside of an aerial work platform using a single 6-ft shock-absorbing lanyard. The guideline reviews the inspection, installation and the use and precautions.
FM Global Hot Work Permit
The Hot Work Permit is required for any temporary operation involving open flames or producing heat and/or sparks.
This includes, but is not limited to: brazing, cutting, grinding, soldering, torch-applied roofing and welding.
Golf Cart Safety Toolbox Talk Protected Document
Toolbox Talk training for Golf Cart Safety.
Grill and Cooking Equipment Safety
Guidelines for BBQ grills and other outdoor cooking; and also, indoor cooking and food reheating.
Grip Pinch Risk Factor Toolbox Safety Talk Protected Document
Reviews Grip Pinch Risk Factor with an introduction, warm-up, microbreak/recovery, injury prevention suggestions, and pro tips.
Hand and Power Tools Toolbox Talk
Reviews general and specific requirements.
Hot Work Program Protected Document
The Occupational Safety and Health Administration and the Fire Code of New York State(FCNYS) require facilities to develop procedures to protect both human health and the facility itself from the hazards posed by hot work in the workplace. This program is intended to provide the Cornell University community with the guidance necessary to comply with these regulations.